VLF CTP Series - page 7

Product name
PlateRite Ultima 24000
24000ZX 24000Z 24000SX 24000S
Recording system
External drum
Light source
1,024 channel
laser diode x 2
512 channel
laser diode x 2
1,024 channel
laser diode x 1
512 channel
laser diode x 1
Plate size
Maximum 1,750 x 1,400 mm [68.8" x 55.1"];
Minimum 650 x 550 mm [25.6" x 21.7"]*
1
Dual plate support
Support for two plates,
maximum 1,060 x 1,600 mm [41.7" x 62.9"] each
Factory
option
Imaging size
Maximum 1,750 x 1,385 mm [68.8" x 54.5"]
*
2
(Leading edge gripper margin: 8 mm [0.32"];
Trailing edge gripper margin: 7 mm [0.28"])
Plate thickness
0.2 to 0.4 mm [7.9 to 15.7 mil]*
3
Plate type
Thermal aluminum plate
Resolutions
1,200
*
4
, 2,400, 2,438, 2,540 dpi
Productivity
See productivity chart in this brochure
Press punch systems
Registration punch
Interface
S-PIF
Dimensions*
5
(W x D x H)
Main unit: 3,840 x 2,100 x 1,795 mm
[151.2" x 82.7" x 70.7"]
Weight
Main unit: 3,710 kg [8,162 lb] (maximum)
Power requirements
Main unit : Single phase 200 to 240 V, 5.2 kW, 35 A
Chiller unit: Single phase 200 to 240 V, 0.7 kW, 4 A
(Z and ZX models require two chiller units)
Blower unit: Single phase 200 to 240 V, 1 kW, 10 A
Environment
Recommended: Temperature 21 to 25°C (69.8 to
77°F); Relative humidity: 50 to 70%
Required : Temperature 18 to 26°C (64.4 to
78.7°F); Relative humidity: 40 to 70%
Standard
accessories
Manual plate loading table, chiller unit,
blower unit, signal tower
Optional
accessories
Punch systems (various printing press punches),
punchless plate handling option, dual plate loading
support (S model only), 0.5 mm plate thickness support
MA-L40000, SA-L40000 Skid AT-M
PlateRite Ultima 16000
II
16000IIZ
1600IIS
16000IIE
External drum
512 channel laser diode x 1
Maximum 1,470 x 1,165 mm [57.8" x 45.8"];
Minimum 650 x 550 mm [25.6" x 21.7"]*
7
Not supported
Maximum 1,470 x 1,154 mm [57.8" x 45.4"]
*
8
(Leading edge gripper margin: 6 mm [0.24"];
Trailing edge gripper margin: 5 mm [0.20"])
Maximum 1,470 x 1,157 mm
[57.8" x 45.5"]
(Leading edge grippermargin:3mm [0.12"];
Trailingedge grippermargin:5mm [0.20"])
0.2 to 0.4 mm [7.9 to 15.7 mil]*
7
Thermal aluminum plate
1,200
*
4
, 2,400, 2,438, 2,540 dpi
See productivity chart in this brochure
Registration punch
Punchless plate handling
S-PIF
Main unit: 1,775 x 2,740 x 1,515 mm
[69.9" x 107.9" x 59.7")]
Main unit: 1,640 kg [3,608 lb] (maximum)
Main unit : Single phase 200 to 240 V, 5 kW, 25 A
Chiller unit : Single phase 200 to 240 V, 0.7 kW, 4 A
Blower unit : Single phase 200 to 240 V, 1 kW, 10 A
Recommended: Temperature 21 to 25°C (69.8 to 77°F); Relative humidity: 50 to 70%
Required : Temperature 18 to 26°C (64.4 to 78.7°F); Relative humidity: 40 to 70%
Chiller unit, blower unit
Punch systems (various printing press punches),
punchless plate handling option
Manual plate loading table, MA-L16000, AT-M
*7. A minimum plate size of 450 x 370 mm and thickness of 0.15 mm are offered as an
option.
*8. When the punchless plate handling option is used, the leading edge gripper margin
is 3 mm and the trailing edge gripper margin is 5 mm.
Standard layout for main unit and autoloader
PlateRite
Ultima 16000II
PlateRite Ultima 16000
II
MA-L16000
MA-L40000
Automatic
processor
Automatic
processor
AT-M16000
AT-M36000
II*
* AT-M24000
II
, when connected to
automatic processor only.
PlateRite Ultima
40000/36000/24000
PlateRite Ultima 40000/36000/24000
Mix and match up to two autoloaders
• Connect two Skid autoloaders
Load up to 1,200 plates of the same type. If you need to
output high volumes of the same type of media, this setup
enables continuous operation for a surprisingly long time.
• Connect two MA-L autoloaders
Automatically supply up to eight different types of media.
This setup is strongly recommended for companies that
handle many different types of plates.
• Connect one Skid autoloader
and one MA-L autoloader
Load the Skid autoloader with the media you use most
often, and load the MA-L with lower volume media for a
more flexible plate supply environment.
• Not compatible with the PlateRite Ultima 16000II.
Skid
Skid
MA-L
MA-L
Skid
MA-L
1,2,3,4,5,6 7
Powered by FlippingBook