VLF CTP Series - page 6

Significantly increasing CtP productivity and press operating ratios
Multi-autoloader
PlateRite Ultima series specifications
Product name
PlateRite Ultima 48000
48000SX
48000S
Recording system
External drum
Light source
1,024 channel
laser diode x 1
512 channel
laser diode x 1
Plate size
Maximum 2,900 x 1,350 mm [114.1" x 53.1"];
Minimum 650 x 550 mm [25.6" x 21.7"]
Dual plate support
Support for two plates,
maximum 1,450 x 1,350 mm [57.0" x 53.1"] each
Imaging size
Maximum 2,900 x 1,335 mm [114.1" x 52.5"]
*
2
(Leading edge gripper margin: 8 mm [0.32"];
Trailing edge gripper margin: 7 mm [0.28"])
Plate thickness
0.3 to 0.4 mm [11.9 to 15.7 mil]*
3
Plate type
Thermal aluminum plate
Resolutions
1,200*
4
, 2,400, 2,438, 2,540 dpi
Productivity
See productivity chart in this brochure
Press punch systems
Registration punch
Interface
S-PIF
Dimensions*
5
(W x D x H)
Main unit: 4,600 x 2,100 x 1,795 mm
[181.2" x 82.7" x 70.7"]
Weight
Main unit: 4,000 kg [8,800 lb] (maximum)
Power requirements
Main unit : Single phase 200 to 240 V, 5.2 kW, 32 A
Chiller unit : Single phase 200 to 240 V, 0.7 kW, 4 A
Blower unit : Single phase 200 to 240 V, 1 kW, 10 A
Environment
Recommended: Temperature 21 to 25°C (69.8 to
77°F); Relative humidity: 50 to 70%
Required : Temperature 18 to 26°C (64.4 to
78.7°F); Relative humidity: 40 to 70%
Standard
accessories
Manual plate loading table, chiller unit,
blower unit, signal tower
Optional
accessories
Punch systems (various printing press
punches), punchless plate handling option,
0.5 mm plate thickness support
SA-L48000 Skid, MA-L40000*
6
, AT-M
PlateRite Ultima 40000
40000SX
40000S
External drum
1,024 channel
laser diode x 1
512 channel
laser diode x 1
Maximum 2,280 x 1,600 mm [89.7" x 62.9"];
Minimum 650 x 550 mm [25.6" x 21.7"]
*
1
Support for two plates,
maximum 1,060 x 1,600 mm [41.7" x 62.9"] each
Maximum 2,280 x 1,585 mm [89.7" x 62.4"]
*
2
(Leading edge gripper margin: 8 mm [0.32"];
Trailing edge gripper margin: 7 mm [0.28"])
0.2 to 0.4 mm [7.9 to 15.7 mil]*
3
Thermal aluminum plate
1,200*
4
, 2,400, 2,438, 2,540 dpi
See productivity chart in this brochure
Registration punch
S-PIF
Main unit: 3,840 x 2,100 x 1,795 mm
[151.2" x 82.7" x 70.7"]
Main unit: 3,720 kg [8,184 lb] (maximum)
Main unit : Single phase 200 to 240 V, 5.2 kW, 35 A
Chiller unit : Single phase 200 to 240 V, 0.7 kW, 4 A
Blower unit : Single phase 200 to 240 V, 1 kW, 10 A
Recommended: Temperature 21 to 25°C (69.8 to
77°F); Relative humidity: 50 to 70%
Required : Temperature 18 to 26°C (64.4 to
78.7°F); Relative humidity: 40 to 70%
Manual plate loading table, chiller unit,
blower unit, signal tower
Punch systems (various printing press
punches), punchless plate handling option,
0.5 mm plate thickness support
MA-L40000, SA-L40000 Skid*
6
, AT-M
PlateRite Ultima 36000
36000ZX 40000SX 36000SX 36000S
External drum
1,024 channel
laser diode x 2
512 channel
laser diode x 2
1,024 channel
laser diode x 1
512 channel
laser diode x 1
Maximum 2,100 x 1,600 mm [82.6" x 62.9"];
Minimum 650 x 550 mm [25.6" x 21.7"]
*
1
Support for two plates,
maximum 1,060 x 1,600 mm [41.7" x 62.9"] each
Factory
option
Maximum 2,100 x 1,585 mm [82.6" x 62.4"]
*
2
(Leading edge gripper margin: 8 mm [0.32"];
Trailing edge gripper margin: 7 mm [0.28"])
0.2 to 0.4 mm [7.9 to 15.7 mil]*
3
Thermal aluminum plate
1,200*
4
, 2,400, 2,438, 2,540 dpi
See productivity chart in this brochure
Registration punch
S-PIF
Main unit: 3,840 x 2,100 x 1,795 mm
[151.2" x 82.7" x 70.7"]
Main unit: 3,720 kg [8,184 lb] (maximum)
Main unit : Single phase 200 to 240 V, 5.2 kW, 35 A
Chiller unit: Single phase 200 to 240 V, 0.7 kW, 4 A
(Z and ZX models require two chiller units)
Blower unit: Single phase 200 to 240 V, 3 kW, 10 A
Recommended: Temperature 21 to 25°C (69.8 to
77°F); Relative humidity: 50 to 70%
Required : Temperature 18 to 26°C (64.4 to
78.7°F); Relative humidity: 40 to 70%
Manual plate loading table, chiller unit,
blower unit, signal tower
Punch systems (various printing press punches),
punchless plate handling option, dual plate loading
support (S model only), 0.5 mm plate thickness support
MA-L40000, SA-L40000 Skid*
6
, AT-M
Main unit specifications
*1. A minimum size of 500 x 550 mm is offered as a factory option.
*2. When the punchless plate handling option is used, the leading edge gripper margin is 5 mm and the trailing edge gripper margin is 7 mm.
*3. When the factory option for support of 0.5 mm thick plates is selected, the supported plate thickness is 0.3 to 0.5 mm. *4 1,200 dpi uses doubled 2,400 dpi dots.
*5. For information on system dimensions, please consult your Screen representative. *6 There are limits to the sizes of plate this unit can handle.
The multi-autoloader system automates everything from plate loading to imaging, transport, developing and unloading in a single ongoing set of operations.
It makes it possible to continuously output CtP plates for long periods of time, and significantly increases both productivity and press operating ratios.
Handling a large volume of single-size plates at once
Skid autoloader
The Skid autoloader makes it possible to set an entire pallet’s worth of
large-size plates directly onto a unique skid base. Since a large number
of plates of the same size can be set in place at once, the strain
involved in plate loading is greatly reduced. The Skid autoloader is an
extremely useful component for creating a fully automated CtP line.
Choose the right media for the job
MA-L (multi-cassette autoloader)
The MA-L is an autoloader that can supply media as needed
from any of its multiple cassettes, each of which can be loaded
with a different size or type of media. The MA-L40000 features
four cassettes, and can supply up to 300 large-size plates
automatically (plate thickness: 0.3 mm). The MA-L16000 can
be equipped with cassettes that hold up to 75 plates*, and can
supply a maximum of 450 plates automatically. Units can be
equipped with three or six independent cassettes. Even after
installation, the three-cassette type can be upgraded to support
six cassettes.
* For plates 0.3 mm thick
• Up to a maximum of 600 plates (for plates 0.3 mm thick; depends on the plate size).
• Not compatible with the PlateRite Ultima 16000II.
1,2,3,4,5 7
Powered by FlippingBook