VLF CTP Series - page 5

Upgrade to larger size plate output when you
get a larger press
The PlateRite Ultima 24000 and PlateRite Ultima 36000 can
be upgraded to handle the same size of plates as the PlateRite
Ultima 40000. In other words, the PlateRite Ultima 24000
and PlateRite Ultima 36000 not only provide high-end CtP,
they also offer the flexibility to support larger plates if you get a
large-format press in the future.
• Not all models can be upgraded.
Upgrade to higher productivity and support
greater work volume
The PlateRite Ultima 16000II can be upgraded for higher
productivity even after installation, with the replacement of a few
key parts. Equipment like the PlateRite Ultima 16000II helps you
schedule and minimize your equipment investment costs.
Automatic inline plate punching eliminates the
need to adjust registration at the press
The PlateRite Ultima series automatic inline punching system
punches holes in plates immediately before they are loaded onto
the drum. The punch holes ensure consistent plate placement
on the drum, when used in conjunction with registration pins.
This helps eliminate imaging variations caused by improper plate
placement, and results in superior registration accuracy.
When optional press punch blocks are used (up to 10
Consecutive imaging of pairs of plates
Not only can the advanced PlateRite Ultima large-format
platesetters load a single large-size plate onto the drum, they
can also load pairs of smaller plates together. Imaging pairs of
plates increases productivity, since plates need to be loaded
and unloaded fewer times. The PlateRite 36000 and PlateRite
24000’s ZX and Z series models also feature twin imaging
heads that enable simultaneous imaging of two plates, for even
higher productivity.
punch blocks can be installed and selected according to plate size
and press type), the imaged plates can be loaded directly onto the
press after output to ensure registration accuracy is maintained.
The use of press punch blocks during plate output not only
removes the need for manual punching later on in the workflow,
but also practically eliminates the need to adjust register at the
press. The result is shorter press make-ready time and improved
press operating ratios, for even better overall productivity.
The flexibility to upgrade in the future
Increased efficiency supplying the press
Higher productivity with dual plate loading models
Plate size during dual plate loading
PlateRite Ultima 48000
16 A4-size pages
PlateRite Ultima 40000
8 A4-size pages
PlateRite Ultima 36000
PlateRite Ultima 24000
• !is is a factory option for the PlateRite Ultima 36000S/24000S.
• !e PlateRite Ultima 16000II does not support dual plate loading.
Ultima 24000
Maximum plate size
1,750 x 1,400 mm
Ultima 36000
Maximum plate size
2,100 x 1,600 mm
Ultima 40000
Maximum plate size
2,280 x 1,600 mm
Ultima 16000
E (17)
Ultima 16000
S (25)
Ultima 16000
Z (31)
• Upgrading to support larger plate sizes
• PlateRite Ultima 16000II productivity upgrade
Numbers in parentheses indicate productivity.
• Values as determined under Screen’s operating conditions
• !e PlateRite 16000IIE offers punchless plate handling.
1,2,3,4 6,7
Powered by FlippingBook